Gas Detection >> Fixed gas detection system (Transmitter) >> Wireless Fixed Gas Detector-SensCast

Wireless Fixed Gas Detector-SensCast

    Comprehensive Solution to Meet Application Requirements
  • All components available for 900 MHz or 2.4 GHz systems
  • Remote or locally mounted sensors for ideal detector location
  • Ultra-low power transmitter has internal power source
  • Hazardous area models and unclassified area models
  • Can be used for short-term and permanent installations
    Uncompromising Security Reliability
  • Can be used for facility-wide or localized monitoring networks
  • Certified for Division 1 and Division 2 hazardous classified areas
  • Repeaters serve to connect the wired system from the controller to the DCS/PLC
  • Wireless relay allows control of notification and mitigation functions
  • Dual sensor models have independent outputs and alarms for each channel
    User Friendly and Intuitive
  • Significantly lowers installation costs from cabling and conduit installation
  • Mobile browser or computer access to system settings and measurements
  • Easy, menu-driven setup with confirmed signal notifications
  • Relay activation controls including three alarm levels, com, and power
  • Available survey tools to analyze signal performance and layout
Intuitive and Cost Effective Solution for Complex Applications SensCast takes a unique approach to solving the communication and connectivity challenges found in many gas detection applications. Starting with proven toxic gas and oxygen sensors and powerful transmitters, SensCast then provides options for connecting and communicating sensor measurements, alarm conditions, and transmissions to local networks and facility-wide networks, without expensive and traditional hard wiring.
Sensidyne

Product Details

Details

    Sensors
  • Gas Sensors: Electrochemical
  • Temperature: See Sensor Datasheet
  • Humidity: See Sensor Datasheet
  • Control
  • Magnetic Keypad: ACK, << (Back), ▲, ▼
  • Security: Password Protected Configuration Menu
  • Display
  • LEDS: Four (4) Red, corresponding to the magnetic keypad, and Alarm Relay when equipped.
  • Graphical LCD: 128 x 64 pixel display
  • 1. SensCast Detector
  • Intrinsic Safety: Class I Div 2, Class A, B, C, D
  • Temperature: -40°C to 60°C
  • Power: 3.6 V 19AH Lithium D cell battery
  • Memory: Non-Volatile
  • 2. SensCast Receiver
  • Intrinsic Safety: Class I Div 2, Class A, B, C, D
  • Temperature: -25°C to 60°C
  • Humidity: 0-90% RH, non-condensing
  • Power: 10 – 30VDC or 100 – 240VAC, 8mA max 40W at 240VAC, 208mA max 5W @ 24VDC
  • 2. Relays: 8 dry contacts Form C standard 5A 28VDC and 250VAC resistive load
  • 3. SensCast relay
  • Intrinsic Safety: Class I Div 2, Class A, B, C, D (Protective)
  • 4. Power: 10 – 30VDC @ 3W
  • Memory: Non-Volatile
  • 4. SensCast Repeater
  • Intrinsic Safety: Class I Div 2, Grps A, B, C, D (Enclosure)
  • Temperature: -40°C to 60°C
  • Power: 10 – 30VDC @ 10W max
  • Memory: Non-Volatile
  • 900MHz WiFi Transmission
  • 2mA during “sleep” mode
  • 40mA reception
  • Up to 1A transmission at 1W (transmission can be set from 10mW, 100mW, 400mW to 1W)
  • 30dBm at 1W transmission
  • Reception -100 dBm
  • Frequency hopping 902 – 928MHz
  • 2.5GHz WiFi transmission
  • 2mA during “sleep” mode
  • 170mA at 125mW transmitting (fixed)
  • 21dBm at 125mW transmitting
  • Reception -95 dBm
  • Frequency hopping 2400 – 2483.5MHz

Related Products

Frequently Asked Questions

Can we find the PT HAS product on the e-catalogue (LKPP) ?

Absolutely, almost all PT HAS products can be found in the e-catalogue.

How about the warranty for products from PT HAS ?

PT HAS Supply’s products include a 1-year official warranty for damage caused by manufactured defects.

Has the PT HAS product been calibrated? What if the calibration period is over?

Products from PT HAS have been calibrated and are ready to use. For further calibration, PT HAS already has a calibration lab that is ISO 17025 accredited and is ready to help customers who need recalibration.

What if the product has a problem and needs repair?

PT HAS has a local service center (in Jakarta), and our technicians are trained in the manufacture of the products we are agents for. For repairs and troubleshooting, we try to do it locally. and we make sure that the spare parts we supply are official spare parts from manufacturers.

Do we get training on using the tool after making a purchase at PT Has?

For all product purchases at PT HAS, usage training is included and is unlimited.

Recent Case Studies

Scroll to Top

Search

Type what you are looking for and filter the search results
Quote Form
Company Details
Product Details