Sound & Vibration >> Noise and Vibration Monitoring Stations >> Noise Monitoring Station Class 1 SV 307A
Noise Monitoring Station Class 1 SV 307A
SV 307A for continuous noise level monitoring through the integration of a class 1 sound level meter with a 4G modem and GPS. The waterproof casing can be removed to gain access to the user interface with color screen and operating keyboard. The SV 307A is equipped with a patented MEMS microphone with guaranteed lifetime and measurement data is stored on a removable microSD card and sent via an integrated 4G modem to a dedicated server in the cloud using the SvanNET platform.
This is also taken into account by system verification using an internal noise source at 90 dBA and 1 kHz, which allows you to always get information about the operating status of the microphone.
Other variables can also be integrated into the system, such as weather conditions, wind speed, wind direction, rain, humidity, etc. This includes monitoring PM2.5 or PM10 particulate material along with noise data via external sensors. The SV 307A is the ideal choice for measuring environmental noise, providing all environmental monitoring parameters for noise control, evaluation and modeling.
It is ideal for environmental measurements, construction monitoring, preparation of noise maps, industrial noise monitoring, environmental impact assessment, compliance with environmental management plans, noise control in surrounding areas, etc. and noise modeling. It is ideal for environmental measurements, construction monitoring, preparation of noise maps, industrial noise monitoring, environmental impact assessment, compliance with environmental management plans, noise control in surrounding areas, etc. and noise modeling.
It is ideal for environmental measurements, construction monitoring, preparation of noise maps, industrial noise monitoring, environmental impact assessment, compliance with environmental management plans, noise control in surrounding areas, etc.
This is also taken into account by system verification using an internal noise source at 90 dBA and 1 kHz, which allows you to always get information about the operating status of the microphone.
Other variables can also be integrated into the system, such as weather conditions, wind speed, wind direction, rain, humidity, etc. This includes monitoring PM2.5 or PM10 particulate material along with noise data via external sensors. The SV 307A is the ideal choice for measuring environmental noise, providing all environmental monitoring parameters for noise control, evaluation and modeling.
It is ideal for environmental measurements, construction monitoring, preparation of noise maps, industrial noise monitoring, environmental impact assessment, compliance with environmental management plans, noise control in surrounding areas, etc. and noise modeling. It is ideal for environmental measurements, construction monitoring, preparation of noise maps, industrial noise monitoring, environmental impact assessment, compliance with environmental management plans, noise control in surrounding areas, etc. and noise modeling.
It is ideal for environmental measurements, construction monitoring, preparation of noise maps, industrial noise monitoring, environmental impact assessment, compliance with environmental management plans, noise control in surrounding areas, etc.
SVANTEK
Product Details
Details
- Standards Class 1: IEC 61672-1:2013, Class 1: IEC 61260-1:2014
- Weighting Filters A, B, C, Z, LF
- Time Constants Slow, Fast, Impulse RMS
- Detector Digital True RMS detector with Peak detection, resolution 0.1 dB
- Microphone Patented MEMS based design microphone ST 30A in 1/2” housing
- Preamplifier Integrated Linear Operating Range 30 dBA RMS ÷ 128 dBA Peak (in accordance to IEC 61672) Dynamic
- Measurement Range 23 dBA RMS ÷ 128 dBA Peak (typical from noise floor to the maximum level) Internal Noise Level Less than 23 dBA RMS Dynamic Range >100 dB Frequency Range 20 Hz ÷ 20 kHz
- Meter Mode Results Elapsed time, Lxy, Lxeq (LEQ), Lxpeak (PEAK), Lxymax (MAX), Lxymin (MIN), LxyE (SEL), 2 x LR (ROLLING LEQ),10 x LN (LEQ STATISTICS), Lden, LEPd, Ltm3, Ltm5, GPS coordinates
- Measurement Profiles Simultaneous measurement in three profiles with independent set of filters (x) and detectors (y) Statistics Ln (L1-L99), complete histogram in meter mode
- Data Logger Logging of summary results (SR) and spectra data with interval step down to 1 s and time history (TH) of selected parameters with shorter interval step down to 100 ms 1/1 Octave Analysis Real-time analysis meeting Class 1 requirements of IEC 61260, centre frequencies from 31.5 Hz to 16 kHz 1/3 Octave Analysis Real-time analysis meeting Class 1 requirements of IEC 61260, centre frequencies from 20 Hz to 20 kHz
- Audio Recording Time domain records to wav file format on demand with selectable bandwidth and recording period Remote System Check Real-time system check and Built-in sound source producing level of approx. 100 dB at 1 kHz GPS Time synchronization and localization
- Memory MicroSD card 32 GB (removable & upgradeable up to 128 GB)
- Display and Keyboard OLED colour display 128 x 160 px and 10 push-button keyboard
- Communication Interfaces USB 2.0 4G modem RS 232 for meteo module or dust monitor Ingress Protection Rating IP 54 (significant protection from dust, protection from rain, spraying and splashing)
Related Products
Frequently Asked Questions
Can we find the PT HAS product on the e-catalogue (LKPP) ?
Absolutely, almost all PT HAS products can be found in the e-catalogue.
How about the warranty for products from PT HAS ?
PT HAS Supply’s products include a 1-year official warranty for damage caused by manufactured defects.
Has the PT HAS product been calibrated? What if the calibration period is over?
Products from PT HAS have been calibrated and are ready to use. For further calibration, PT HAS already has a calibration lab that is ISO 17025 accredited and is ready to help customers who need recalibration.
What if the product has a problem and needs repair?
PT HAS has a local service center (in Jakarta), and our technicians are trained in the manufacture of the products we are agents for. For repairs and troubleshooting, we try to do it locally. and we make sure that the spare parts we supply are official spare parts from manufacturers.
Do we get training on using the tool after making a purchase at PT Has?
For all product purchases at PT HAS, usage training is included and is unlimited.
Recent Case Studies
Real-Time Air Monitoring Protects New Yorkers, Saves Time and Money During Expansion of Nation’s Busiest Commuter Rail Line
- By:Maya Drew |
- Date:10/08/2023
- By: Maya Drew
- Date: 08/10/2023
Premium Remediation Monitoring System Protects Communities, Ensures Compliance During SoCal Industrial Redevelopment
- By:Maya Drew |
- Date:09/08/2023
- By: Maya Drew
- Date: 08/09/2023